The operation process of CNC machining in China ptj CNC parts processing plant tells you

The operation process of CNC machining in China ptj CNC parts processing plant tells you

CNC machining in China is to process raw materials through milling, drilling, polishing and other machinery, and then process them according to the desired effect, which can produce screws, fishing gear accessories, mobile power shells and other parts.

During CNC machining operations in China, it is necessary to stay focused, chat, and cooperate with each other. Operators must not operate in a state of irritability and fatigue, so as to avoid accidents and ensure work safety. Before machine work, check whether the moving part is filled with lubricating oil. After CNC machining in China, start and check whether the clutch and brake are normal, and run the machine idling for 1 to 3 minutes. Operation is strictly prohibited when the machine is faulty. If abnormal sound or malfunction of the machine is found, the power switch should be turned off immediately for inspection. When leaving get off work, the power should be turned off, and the finished products, sundries and side materials on the post should be sorted out to ensure a clean and safe working environment. Non-staff are forbidden to enter.

Under normal circumstances: first carry out the cutting punch, then go to the welding, then carry out the sanding and then spray the oil, and then assemble the accessories and then the shipment can be made. For small parts, a lot of surface treatment after polishing, electroplating or oil spraying are required. Then welding or screwing assembly packaging and shipping. Before all employees enter the work position, Dongguan CNC processing needs to check whether the clothing meets the work requirements. Slippers, high heels, and clothing that affect safety are prohibited, and women with long hair must wear hard hats. Maintain the correct posture at work, cope with the work with sufficient energy, if you have any physical discomfort, you should leave the job and report to the leader.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *