Now that it is so difficult to recruit laborers, if companies want to improve their production efficiency, they cannot do it without relying on equipment and technology. The wide application of CNC lathe processing in China has greatly improved the efficiency of product lathe processing and reduced manpower and material resources. Generally, one person can watch multiple machines, which also reduces the labor intensity of workers. But what kind of products are suitable for processing by Chinese CNC lathes? What are the characteristics of products processed by CNC lathes in China? Ding Pei will answer for everyone below.
- First of all, it is generally necessary to carry out large quantities of products processed by Chinese CNC lathes to adapt to automatic lathe processing. Automatic lathes can realize fully automatic processing of workpieces and adopt special automatic feeding mechanisms and fixtures, which are highly efficient, but many parts are The use of special design can greatly improve efficiency, so once the batch of workpieces is too small, the use of automatic lathes for processing requires adjustment of tooling fixtures and automatic feeding mechanisms, which is very troublesome.
- The structure of the product or workpiece should be suitable for automatic feeding and processing. When using an automatic lathe for processing, the structure of the workpiece should be suitable for automatic sorting of the workpiece and suitable for automatic feeding. (For example, whether the workpiece can be fed by an automatic feeding mechanism such as a vibrating plate, or whether the long shaft parts are suitable for automatic feeding of the hopper, if it is not possible, manually discharge the material on the guide rail; in addition, the workpiece is suitable for full-automatic when the cross-section of the workpiece is round, hexagonal, etc. Processing, but the shape is more complex, it is more difficult to fully automatic processing.)
- Whether the material of the workpiece is suitable for automatic processing. Generally, brass, zinc alloy, ordinary carbon steel and other materials have better processing performance and less wear on tools, so they are more suitable for automatic lathe processing. High-speed steel, stainless steel and other parts with poor machining performance are more difficult to machine. The tools are severely worn during processing, or the discharge of materials such as copper is more troublesome during processing. Some other steels are more severely hardened and are not suitable for automatic lathes. Fully automatic processing.
- Whether the diameter, length, and processing technology of the workpiece are suitable for automatic lathe processing.
Through the above analysis, it can be known that determining whether a workpiece is suitable for automatic processing with automatic lathes is analyzed in many aspects, and it is not just a mass-produced product that must be suitable for automatic processing with automatic lathes.